24

Nov 2026

PhD Dissertation

A Late Jurassic Evaporite Giant: Facies, Geochemistry, Basin Restriction and Timing of the Arab–Hith Reservoir–Seal System on the Arabian Plate

Abstract

The Upper Jurassic Arab and Hith formations of the Arabian Plate constitute one of the most important reservoir–seal systems on Earth. The carbonate members of the Arab Formation host the giant reservoirs of Ghawar and many other fields, while the intervening Arab anhydrites and the overlying Hith anhydrite form a regionally continuous seal covering some 640,000 km2. Ranked among the world’s ‘evaporite giants’, these deposits also provide a natural, plate-scale analogue for the geological storage of CO₂, hydrogen and natural gas beneath an evaporite caprock. Yet, because industry attention has focused on the carbonate reservoirs and the evaporites do not crop out in a preserved state (except for the Dahl Hith cave near Riyadh, Saudi Arabia), their internal facies architecture, geochemistry and petrophysical properties have never been documented from continuous core. This thesis addresses that gap using the shallow stratigraphic well BH-02, drilled by KAUST ~60 km south-east of Riyadh, close to the Arab–Hith depocentre in central Saudi Arabia, which recovered 390 m of continuous core and a full wireline-log suite through the Sulaiy, Manifa and Hith formations and the Arab A, B and C members. 

An integrated approach combines core description, thin-section petrography, wireline logs, XRD and XRF geochemistry, core-plug porosity and permeability measurements, stable isotope geochemistry (strontium, sulphur, oxygen and carbon) and regional well-log correlation. A readily applicable classification scheme for evaporite textures is proposed, recognising nodular, mosaic and bedded anhydrite, secondary gypsum and halite as the principal facies, the latter recording the most restricted, supersaline conditions in the basin. Strontium concentration in the carbonate and sulphate facies is calibrated as a quantitative palaeosalinity proxy: median Sr decreases systematically from bedded, through mosaic, to nodular anhydrite, and inverting Sr to a marine-connectivity index allows facies and geochemistry to be combined into a chemical sequence model of repeated restriction–connectivity cycles, from euhaline carbonate precipitation through penesaline sulphate precipitation to supersaline halite precipitation. Paired sulphur and oxygen isotope analyses of the Arab–Hith sulphates further constrain the marine origin of the brines and the degree of basin restriction. Full restriction was reached only twice, within the Arab C and Hith evaporites. 

The petrophysical characterisation shows that the seal and reservoir facies have a diagnostic, regionally transferable wireline signature. Clean anhydrite is petrophysically homogeneous, with porosities below 3% and permeabilities of 10−6–10−4 mD, whereas the Arab dolomitic carbonates reach 16–17% porosity and up to 13 mD; a porosity–permeability transform spanning six orders of magnitude (R2 = 0.71) provides a continuous pseudo-permeability curve. The seal is only as tight as its purest sulphate, such that dolomite-bearing anhydrite and carbonate stringers within the Arab C anhydrite retain measurable permeability. Further, gypsum concentrated at the contacts with the adjacent carbonate aquifers maps zones of seal rehydration, which affects shallow wells below the gypsum-to-anhydrite transition depth at approximately 600 m of burial. Two regional transects across wells in Saudi Arabia, Qatar, the UAE and Iran show that the layer-cake reservoir–seal architecture of BH-02 is representative of the platform, while isopach maps reveal offset depocentres: the thickest Hith (>110 m) lies against the Rimthan Arch beneath the northern Gulf coast, whereas the thickest Arab A–B–C interval lies some 300 km to the south-southwest. Seal thickness degrades towards the Tethyan margin in the same direction in which reservoir quality improves, defining a reservoir–seal trade-off. North of the Rimthan Arch the shelf succession passes into the halite-dominated Gotnia Basin, that is genetically linked to Arab–Hith shallow-platform deposits, but a distinctly deeper basin evaporite system. Further, this study provides the first systematic 87Sr/86Sr chronostratigraphy of the Arab C–Hith–Manifa–Sulaiy succession, calibrated against the LOWESS reference curve and combined with nannofossil biostratigraphy. The top of the Hith is placed at approximately 149.8–150 Ma, in the Upper Kimmeridgian, revising its commonly cited Tithonian assignment, and the Jurassic–Cretaceous boundary is positioned within the middle of Sulaiy Formation. The Hith–Manifa contact represents 1.37 ± 0.25 Ma of missing time, longer than generally assumed for the AP7/AP8 sequence boundary and supported by brecciation and terrestrial input at the base of the Manifa. Across this contact the apparent sedimentation rate falls threefold, from 91.2 ± 3.8 m/Ma to 29.0 ± 0.3 m/Ma, mirrored by an equivalent thinning of the 405-kyr eccentricity cycles, recording a threshold transition from rapid, restricted carbonate–evaporite accumulation to slower open-marine carbonate deposition. The revised chronology restricts the arid Hith stage to the latest Kimmeridgian, shows that the regional Arab reservoir–Hith seal configuration was established by that time and, compared with older circum-Atlantic salt basins, highlights the diachroneity of Jurassic evaporites, whose termination reflects changing accommodation and marine connectivity acting together with climate and eustasy. 

Collectively, the results demonstrate that the Arab–Hith seal is heterogeneous, both vertically and horizontally, and shows that facies-level characterisation from the well to the basin scale is required to refine the depositional model of this evaporite giant and for assessment of this seal for subsurface applications such as CO₂ and gas storage. 

Event Quick Information

Date
24 Nov, 2026
Time
02:00 PM - 04:00 PM
Venue
KAUST, Ibn Sina Building (Bldg. 3), Room 5220