12 NovPhD DissertationDynamic Approaches to Improve Sensitivity and Performance of Resonant MEMS Sensors
Dynamic Approaches to Improve Sensitivity and Performance of Resonant MEMS Sensors
  • Nizar Jaber, supervised by Prof. Mohammad Younis
  • Nano/Micro Mechanics and Motion Lab, KAUST
  • Monday, November 12, 2018
  • 04:00 PM - 05:00 PM
  • Building 4, Level 5, Room 5209
2018-11-12T16:002018-11-12T17:00Asia/RiyadhDynamic Approaches to Improve Sensitivity and Performance of Resonant MEMS SensorsBuilding 4, Level 5, Room 5209Emmanuelle Sougrat
Abstract:

The objective of this dissertation is to investigate several dynamical approaches aiming to improve the sensitivity and performance of Microelectromechanical systems (MEMS) resonant sensors. Resonant sensors rely on tracking shifts in the dynamic features of microstructures during sensing, such as their resonance frequency. We aim here to demonstrate analytically and experimentally several new concepts aiming to sharpen their response, widen their bandwidth, and demonstrate smart functionalities combined into a single resonator. 

The dissertation starts with enhancing the excitations of the higher order modes of vibrations of clamped-clamped microbeam resonators. The concept is based on using partial electrodes with shapes that induce strong excitation of the mode of interest. Using a half electrode, the second mode is excited with high amplitude of vibration. Also, using a two-third electrode configuration is shown to amplify the third mode resonance amplitude compared with the full electrode under the same electrical loading conditions. Then, we demonstrate the effectiveness of higher order modes excitation and Metal organic frameworks (MOFs) functionalization in improving the sensitivity and selectivity of resonant gas sensors. Also, using a single mode only, we show the possibility of realizing a smart switch triggered upon exceeding a threshold mass when operating the resonator near the dynamic pull-in instability. 

The second part of the dissertation deals with the dynamics of the microbeam under a two-source harmonic excitation. We experimentally demonstrate resonances of additive and subtractive type. It is shown that by properly tuning the frequency and amplitude of the excitation force, the frequency bandwidth of the resonator is controlled.

Finally, we employ the multimode excitation of a single resonator to demonstrate smart functionalities. By monitoring the frequency shifts of two modes, we experimentally demonstrate the effectiveness of this technique to measure the environmental temperature and gas concentration. Also, we present a hybrid sensor and switch device, which is capable of accurately measuring gas concentration and perform switching when the concentration exceeds specific (safe) threshold. In contrast to the single mode operation, we show that monitoring the third mode enhances sensitivity, improves accuracy, and lowers the sensor sensitivity to noise. 

Bio:

Nizar Jaber received a B.S. degree in Mechanical Engineering from Jordan University of Sciences and Technology, Jordan in 2010. He earned his master’s in Mechanical Engineering from King Abdullah University of Science and Technology (KAUST) in 2014. He is currently enrolled as a Ph.D. student in Mechanical Engineering in KAUST. His research interests include linear and nonlinear dynamics of MEMS-based resonators with their applications in MEMS sensors and actuators.




MORE INFORMATION

  • Emmanuelle Sougrat

LOCATION

Top